FRANKFURT — May 7, 2012 — “We must work together if we want to develop affordable manufacturing
automation solutions along the entire process chain to help bring about the required reduction in
the cost of the finished product,” VDMA Composite Technology Forum spokesman and KraussMaffei
Technologies GmbH board member Frank Peters told Monday’s “Series manufacture of composites –
across-the-board automation” meeting in Frankfurt. This was the first time that members of the VDMA
Composite Technology Forum and of the partner organisations AVK, Carbon Composites e.V. and CFK
Valley Stade e.V. had got together to exchange ideas. In his welcoming address to industry
representatives and scientists, Frank Peters highlighted the importance of close cooperation
between machinery and plant manufacturers and the industries using fibre composites as well as
among their various networks. More than 150 delegates discussed approaches to automation and what
was required of plant and machinery manufacturers, stressing the benefits of knowledge transfer for
the necessary joint developments.
Lightweight construction leads the way in key user industries
In his keynote address on the challenges of automation, Klaus Drechsler, Professor of Carbon
Composites at Munich Technical University, identified carbon fibre-reinforced plastics (CRP) as
having the greatest potential of all material systems in lightweight construction, with a possible
90 per cent saving in process costs. “Use of carbon fibre- reinforced plastics in industrial-scale
production does however still require considerable research efforts, from the material sciences
through structural mechanics to process engineering. Automation solutions from machinery and plant
manufacturers are the key drivers for industrialisation,” said Klaus Drechsler.
Largely manual production currently predominates in all sectors. The aviation industry and
motor racing normally only require small runs of CRP components, albeit with high quality
requirements. Professor Axel S. Herrmann of Airbus Operations added: “The use of high-quality,
high-performance fibre composites is now well-established in the aviation industry. The experiences
made with small batch and large component manufacturing can also be transferred to other
industries. There are considerable synergies with the motor industry, as aircraft parts, e.g. for
the next generations of single aisle aircraft, have to be made in similarly large quantities.
Highly automated manufacturing processes will have to be developed to satisfy cost and quality
requirements. To achieve this, we need an extensive transfer of knowledge among all networks across
the globe.”
Composite component manufacturing will have to be overhauled completely if large-scale
production is to be introduced in the motor industry, for example, explained Heinrich Timm of AUDI
AG. “Lightweight construction goes far beyond reducing consumption and emissions. Lightweight
construction is also about the sustainable saving of resources and driving safety. That is why the
focus is on lightweight more than ever before, inspiring ideas in composite construction ranging
from steel and aluminium to fibre-reinforced materials. The best material for the purpose, in the
smallest possible quantity and in the right place: that is the way to economic lightweight
construction. This means developing and automating the manufacturing and joining processes for the
production line. The VDMA’s current practice of exchanges between machinery and plant manufacturers
and user industries is of the utmost importance here.” Lightweight components are increasingly
being used for the new generations of motor vehicles in particular, especially to compensate for
the weight of electric vehicle batteries and to cut fleet consumption overall.
In terms of quantity, glass fibre-reinforced plastics (GRP) will continue to dominate the
composites market for a long time to come. However, with increasing rotor diameters the important
wind turbine sector is more and more combining glass fibre-reinforced plastics with carbon
fibre-reinforced plastics to make improvements. Suitably trained workers to implement this in all
fields of application are in short supply, Dr. Rolf Bütje of Nordex told the meeting. “As a result
of expanding rotor diameters, the performance requirements of wind turbines, both on- and offshore,
continue to rise. New construction methods, materials and designs can reduce the weight of the
rotor blades and increase their stability. Simulation tools and automatically pre-set product
qualities are important in helping German suppliers retain their status as market leaders. It
requires know-how from the entire composites industry, as gathered here today,” said Rolf Bütje.
No series manufacture without automation solutions
The use of fibre composites in series production requires reliable processes with short cycle
times and a high degree of accuracy; at the same time, prices of high-performance fibres will have
to come down in order to be competitive. The challenges of automated manufacture arise at every
stage: textile moulded part manufacture, cutting, handling of limp fabricated materials, injection
and hardening processes, tool design, joining and assembly techniques, working and testing of
components.
For all these questions, the Composite Technology Forum brings together more than 130 VDMA
member firms from eight associations to pursue the necessary developments jointly with the customer
industries. With thermo process technology, textile machinery, garment and leather technology,
plastics and rubber machinery, robotics and automation, machine tools, precision tools and testing
machines, the entire process chain is covered, from fibre to finished component. As the
institutional patron of the Composites Europe trade fair, the Forum and its member firms will be
showcasing these skills in Düsseldorf from 9 to 11 October 2012.
Networking essential for success
The German firms of the composites industry, whether producers or users, will however only
remain world leaders if they take the road to series production together. Explaining how all
industries needed to stand shoulder to shoulder, Frank Peters summed up in Frankfurt by saying:
“The use of fibre composites in the series manufacturing of user industries requires a level of
automation not so far achieved. With the VDMA Composite Technology Forum, plant and machinery
manufacturers are making common cause to develop solutions together with the AVK, Carbon Composites
and CFK Valley Stade networks. The partners’ workshop has been warmly welcomed and is an important
milestone. With its excellent research establishments and world leading industries, Germany offers
the best conditions for a leading market position in composites manufacture.”
Posted on May 15, 2012
Source: VDMA
