MÖNCHENGLADBACH, Germany — March 22, 2017 — On cards and draw frames, sliver levelling and sliver quality monitoring are standard. Why not on the comber? Toyota-Truetzschler asked the same question and carried out corresponding developments.
TCO 12 – the only comber with leveling system
The Toyota-Truetzschler Comber TCO 12 is the only comber with integrated leveling system. This is made possible by the multi drive concept. The combed slivers are permanently monitored and the main draft in the drafting system is accordingly adapted. Thus, sliver count deviations due to differences in lap weight do not stand a chance.
TCO 12 – The only comber with quality monitoring
The quality sensor of the leveling system also supplies the signal for permanent quality monitoring of sliver evenness. The results are displayed in form of graphs and spectrograms on the large touch screen.
TCO 12 – The only comber with automatic piecing optimization
Correct setting of the piecing is a tedious process and requires a lot of time, know-how and laboratory capacity.
On the Toyota-Truetzschler Comber TCO 12 all it takes is the push of a button. The machine automatically checks the area around the set value and evaluates the sliver quality. After just a few minutes the machine determines at which setting the optimal sliver evenness and a clean spectrogram is achieved.
TC 12 and T-DATA
Of course it is also possible to transmit all quality data of the TCO 12 to the higher-level data monitoring and management system T-DATA. Here they are also available for long-term analyses.
Posted March 22, 2017
Source: Truetzschler GmbH & Co. KG
